When checking fans, crankshafts, and motors, the lightweight, Pocket-sized RPM meter – Testo 460 gives rapid and accurate readings. There’s no need to stop production or shut down machinery because the checks may be done while the machines are still running.
Carrying out measurements with testo 460 RPM meter
Remove the lightweight meter from the handy belt pouch and carefully wrap the hand strap around your wrist to keep your RPM meter from dropping to the floor. The RPM meter is now ready to be used.
Attach the self-adhesive reflective markers on the measurement item, which may be reordered at any moment. The RPM meter sends out an LED measurement spot that identifies the measuring area’s center. The reflective marker is now aligned with the measurement location.
It’s as simple as that! You can now take rapid and precise measurements on the measuring item with your testo 460 RPM meter from any distance between 10 and 40 cm.
For extra convenience, the testo 460 offers a hold mode that freezes the most recent reading on the display, as well as a backlit display that makes it suitable for use in all lighting circumstances. At the press of a key, you may obtain the minimum and maximum values.
Replace the protective cap on the RPM meter and place it back in the belt pouch, where it will remain safe until you need it again.
